Regardless of the nozzle sizes that we offer (the large nozzle with 3/4″ NPT or the small nozzle with the 3/8″ NPT thread connection), you can use either with any size pressure pot sandblaster or hose size.
Currently, we offer both thread sizes below with this barbed fitting to connect with a more common 1/2″ ID sandblast hose. Or the 3/8″ ID hose.
If you already have a barbed fitting in your blast hose, you can alternatively connect out nozzle with a NPT hex bushing reducer or a NPT reducing coupling + pipe nipple found at most local hardware store.
- 1st: Select the correct NPT thread size.
- 2nd: Select the correct barbed fitting to match the inner diameter of your sandblast hose. This size is for fitting inside a 1/2″ or a 3/8″ inner diameter hose.
- Can be connected to other NPT thread sizes by using a reducer or hex bushing found at many local hardware stores.
- Includes a hose clamp.
3/4″ NPT or 3/8″ NPT x 1/2″ ID Barb Hose Fitting
or 3/8″ NPT x 3/8″ ID Barb Hose Fitting
Connect your NPT Sandblaster Nozzle Assembly Easily
Made of 304 Stainless Steel, you can now sand blast longer before it wears out.
Please select the size that matches your sandblaster assembly. Fits typical sandblast hose size with 1/2″ ID which is common for many Pressure Pot Sandblasters such as Clarke, Harbor Freight, etc. Other size offered is a 3/8″ ID Barb Hose Fitting
Includes Hose Clamp
Last longer than Brass fittings
$11.99
Check out our Sandblasting Supplies
Gravity-Fed Sandblaster
Portable, Quick & Easy Setup
Unique Nozzle Holders & Hose Systems
Check out our Longer-Lasting Nozzle Tips
Select from ceramic or various carbides. Large C1 sizes & regular C2 sizes
Hi sandblasterinfo.com,
I would like to discuss SEO! Strategy for You
I can assist in optimizing your website to reach the first page of Google, thereby increasing the leads and sales generated from your site.
Note: I’d be happy to discuss SEO services in greater detail with you; we can work together. Drop your best number to reach.
Bests Regards,
Tia Brooke
If you don’t want me to contact you again about this, reply with “unsubscribe”