Other Supplies
I created this section of the website to talk about some of the common sandblaster supplies and parts that you will typically need to replace.
Need some sandblaster supplies to continue to keep the blasting going for your projects? I know how it is blasting in the middle of a project and a part wears out. Here is a list of sources for supplies that most people are looking for:
- Nozzle Tips: The tips for a nozzle are the most frequently replaced parts on a blaster. Click the link to read more about the different types and sizes available.
- Sandblasting Gloves: These are needed for both sandblaster cabinets and off site sandblasting. These will keep your hands from being torn up from the abrasive springing back on you.
- Various Sandblaster Parts: Here is a source for a various parts items that tend to wear out and need to be replaced.
- Sandblaster Media: Abrasive media is needed for the continuous sandblasting projects which has sharp edges. The abrasive grit can wear out as well.
Check out our Sandblasting Supplies
Gravity-Fed Sandblaster
Portable, Quick & Easy Setup
Unique Nozzle Holders & Hose Systems
Check out our Longer-Lasting Nozzle Tips
Select from ceramic or various carbides. Large C1 sizes & regular C2 sizes
Thank you for valuable info.what size compressor do i need when using the pressure pot.
HI, CAN YOU RECOMEND A SUPPLIER FOR A STARTER SET UP? FOR BLASTING GLASS MAINLY?? close to reading berkshire so we can go along and view a demonstration. regards Robbie
I have been given to believe one can “sandblast” with maize meal. Is this correct??
Hello,
Lots of good info here!
Rooky here! I have acquired a small pressure pot and would like to blast some pavers, brick, stone, etc. can you list the parts I would need to make sort of like a fat pencil nozzle and/or were to find such assembled nozzles.
Also, what type and grit abrasive f should I try for above projects
Thanks
@Steve,
To engrave in those materials, use silicon carbide or aluminum oxide. Depending on the stencil thickness, maybe about 70-120
Not sure if this is the larger pencil type nozzle you are referring too but check out this: http://amzn.to/29rDbmv
Hey Eric,
Can you recommend a good stencil / plotter machine for making Pet Memorials on rocks and bricks? I’m not sure which one to purchase because there are so many to choose from. Thank you,
Tom
Can you advise me of a good liquid adhesive for use on rock blasting mask material.
Thank you, have been slacking this past year, now need to get going non projects
Tom Summers